Christie Roadie HD+35K User Manual page 80

Section 3: Operation
Exit Key
Press the E
XIT
key on either the built-in keypad and standard IR remote to return to the previous level, such as
the previous menu .
NOTE:
Exiting does not save changes within text editing boxes (including number editing of a slidebar value) or
within drop-down lists. It acts as a "cancel" to all changes.
Arrow Keys
Use the R and L
IGHT
remote to change a slidebar value or check box, or to select a different option within a
drop-down list without having to first scroll through the options. These keys also jump
to the next page in long menus. Refer to
Use the U and D
P
box. On the standard IR remote, use the ON and OFF keys to force the corresponding
state for P
OWER
standard IR remote.
PIP (Picture-in-Picture) Key
NOTE:
PIP performance may be limited by certain high frame rate sources.
Press the PIP key on the standard IR remote to enable or disable the Picture-in-Picture function. This either
allows or prevents the display of two images at once. Typically, PIP displays a smaller "secondary" image
within a large "primary" background. While using PIP, source image adjustments can be made (location and
resizing) to the secondary image only.
To adjust the main image instead, press the PIP key before the adjustment . For example, press G
the R and L
IGHT
To remove the secondary image from the display and return to a single image, press the PIP key while no
menus or slidebars are present.
For more information on PIP functionality, refer to
Swap
Press the SWAP key on the standard IR remote to swap the current picture-in-picture relationship so that the
primary image becomes secondary, and the secondary image becomes primary.
The SWAP key is available on the standard IR remote only. Alternatively, a swap can be accessed in
NOTES: 1)
the Menu system.
Lens Focus, Zoom, and Lens H, Lens V Funtion Keys
The motorized lens control keys ( F
both the built-in keypad and the standard IR remote. When adjusting the image for focus, zoom, horizontal,
and vertical positioning, use the Arrow keys ( L
window appears to indicate the type of adjustment taking place.
Built-in keypad:
• Press the F
OCUS
• Press the Z
OOM
• Press the L
ENS
• Press the L
ENS
3-14
EFT
Arrow keys on either the built-in keypad or the standard IR
OWN
Arrow keys to navigate within a menu, drop-down list or text
, S , and OSD keys. See details provided on the back of the
HUTTER
EFT
Arrow keys to change the gamma level of the main image.
2)
Requires PIP.
OCUS
U or D
P OWN
Arrow buttons to improve the focus of the image.
U or D
P OWN
Arrow buttons to achieve a desired image size.
S + L or R
HIFT EFT IGHT
S + U or D
HIFT P OWN
3.5.6 Editing Text later in this section.
Section 3.9 Working with PIP.
, Z , and H
OOM ORTIZONAL
, R , U , and D
EFT IGHT P
Arrow buttons to position the image horizontally.
Arrow buttons to position the image vertically.
and V
ERTICAL
positioning) are available on
OWN
) related to each function. A small
Roadie HD+35K User Manual
020-100340-02 Rev. 1 (01-2010)
+ PIP +
AMMA