Page 2
The warranty does not apply to any product where the serial number has been removed or obliterated. The warranty also does not apply to any product sold by a reseller to an end user outside of the country where the reseller is located unless (i) Christie has an office in the country where the end user is located or (ii) the required international warranty fee has been paid.
The illustrations in this document are for representation only and may not depict your projector model exactly. Only Christie qualified technicians who are knowledgeable about the hazards associated with high- voltage, ultraviolet exposure, and the high temperatures generated by the projector are authorized to assemble, install, and service the projector.
Battery door. Product documentation For installation, setup, and user information, see the product documentation available on the Christie Digital Systems USA Inc. website. Read all instructions before using or servicing this product. Crimson HD25, Crimson WU25, Crimson HD31, Crimson WU31 1.
To ensure you have the correct module and the projector module is replaced correctly, check module markings, parts lists, and the relevant disassembly and replacement procedures. Components must be replaced with exact equivalents or Christie approved replacement parts. Failure to do so may result in unsafe operation.
This projector is intended for use in a non-cinema environment. This projector must be operated in an environment that meets the operating range specification. Use only the attachments and/or accessories recommended by Christie. Use of others may result in the risk of fire, shock, or personal injury.
Page 15
• Temporary show installations containing Risk Group 3 laser-illuminated projectors may be installed by Christie or sold or leased only to valid laser light show variance holders (laser light show manufacturers) for image projection applications. Such manufacturers may currently hold a valid variance for production of Class IIIb and IV laser light shows and/or for incorporation of the Risk Group 3 laser-illuminated projectors into their shows.
Learn about the labels that may be used on the product. Labels on your product may be yellow or black and white. General hazards Hazard warnings also apply to accessories once they are installed in a Christie product that is connected to power. Fire and Shock Hazard To prevent fire or shock hazards, do not expose this product to rain or moisture.
Optimizing the Integrator Focus and Zoom Extreme misalignment of projection optics can cause permanent damage to critical optical components. Only Christie qualified technicians can perform internal optical adjustments. 1. From the Test Pattern menu, select the Integrator Rod test pattern.
4. Use the Convergence test pattern to assist with adjusting the horizontal and vertical lines. Vertical convergence and rotation is done by adjusting two knobs. Christie recommends rotating a single knob a maximum of a quarter rotation before adjusting the second knob a quarter rotation.
1. Ensure the projector is in a secure position. Christie does not recommend having the projector overhang when replacing the feet, unless the projector is securely positioned. 2. Loosen the lock nut on the affected foot.
Page 97
Corporate offi ces Worldwide offi ces Christie Digital Systems USA, Inc. Africa United Kingdom Columbia Korea (Seoul) ph: 714 236 8610 ph: +27 (0)11 510 0094 ph: +44 (0) 118 977 8000 ph: +57 (318) 447 3179 ph: +82 2 702 1601 Christie Digital Systems Canada Inc.
Need help?
Do you have a question about the Crimson Series and is the answer not in the manual?
Questions and answers