Connecting Devices And Establishing Communication; Imxb Ports - Christie Mirage SST Installation And Setup Manual

Connecting devices and
establishing
communication
Learn how to connect external devices to the projector.
Communication and input ports are located on the projector side input panel (operator side). The
image below shows an example of the video option card slot numbers and the IMXB panel; your panel
may look different.
Video sources can be connected to either the ports on the video option cards or the Ethernet Laser
Rack port on the IMXB.

IMXB ports

The IMXB has a variety of ports that can be used for control, 3D sync, upgrading, retrieving
interrogators, and connecting audio.
Mirage SST Installation and Setup Guide 58
020-102956-08 Rev. 1 (09-2022)
Copyright © 2022 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.