Christie Roadie HD+35K User Manual page 35

Rigging Zones
Use of 4 rigging clamps, positioned
within the assigned rigging zones, is
mandatory
Allow
to ensure stable hoisting/rigging.
Symmetrical placement of clamps
recommended.
Roadie HD+35K User Manual
020-100340-02 Rev. 1 (01-2010)
when hoisting/rigging.
at least 12 inches between clamps
Figure 2-21 Rigging Zones on Projector Handles
Use two safety straps -
one per crossbeam for additional
security.
Route safety straps
though both eyebolts
Route safety strap around
outside of handles.
Figure 2-22 Using Safety Straps
Section 2: Installation and Setup
= rigging zone
TOP VIEW
12"
min.
12"
min.
BOTTOM VIEW
between clamps
Use 4 bottom eyebolts to secure
an additional two safety straps.
BOTTOM VIEW
Route a safety strap
through both eyebolts
on crossbeam.
2-19