Connecting devices and
establishing
communication
Learn how to connect external devices to the projector.
Communication and input ports are located on the projector side input panel (operator side). The
image below shows an example of the video option card slot numbers and the IMXB panel; your panel
may look different.
Video sources can be connected to either the ports on the video option cards or the HDBaseT port on
the IMXB.
IMXB ports
The IMXB has a variety of ports that can be used for control, 3D sync, upgrading, retrieving
interrogators, and connecting audio.
D4K40-RGB Installation and Setup Guide
41
020-102961-06 Rev. 1 (09-2022)
Copyright
©
2022 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.