System Configuration (Optional Input Modules); Working With Pip - Christie Roadie HD+35K User Manual

Section 3: Operation
To calibrate the lens, select the Configuration > Diagnostics and Calibration > ILS Calibration >
Reference Calibration option from the Main menu. This allows the lens to find the center points of each
axis (focus, zoom, horizontal, and vertical), the end stops, and other motion parameters.

3.8.5 System Configuration (Optional Input Modules)

The two "Option Card" entries In the
Configuration
input modules (a.k.a. cards) are present at
INPUT 5 (Option 1) and
If either of these option slots are empty, the
corresponding read-only menu entry does
nothing. If there is a module installed, the
corresponding menu entry may activate a
secondary menu of further options pertaining to
that module.
For example, the Dual SD/HD-SDI module is factory-installed at
secondary menu provides controls for configuring the various connections on this multi-input, multi-output
module. As desired for your application, you can define 1) which physical input loops through to which output,
and 2) which functional input (main or PIP signal) loops through to which output.
3.9

Working with PIP

NOTE:
Seamless switching is not currently supported in this projector.
PIP (Picture-in-Picture) and Seamless Switching are independent , but related projector features that both
utilize two image-processing paths within the projector. In the case of Picture-in-Picture, this double
processing enables you to display two different images simultaneously - typically a smaller "secondary" image
within a large "primary" background. In a seamless switch (not currently available for this projector), the
double processing essentially occurs between displays so that a full image relayed from one source can
smoothly transform into a full image from another source. This change can be virtually instantaneous, or
slowed as desired so that the current image appears to dissolve or "fade" into the new image.
Options for enabling and controlling PIP and Seamless Switching all reside in the same menu. Note, however,
that because both features utilize the projector's double processing capability, PIP and Seamless Switching
cannot be used together. For example, fading a pair of PIP images into a new display from a different source is
not possible.
3-54
menu identify which optional
INPUT 6 (Option 2).
INPUT 5 (Option 1). The
Roadie HD+35K User Manual
020-100340-02 Rev. 1 (01-2010)
Option 1 Card