Christie Roadie HD+35K User Manual page 134

Section 3: Operation
6. In each projector, judge by eye and adjust x/y
coordinates slightly in the following manner:
• To match reds, decrease " Red X" until full field red
screens match.
• To match greens, decrease "Green Y" until full field
green screens match.
• To match blues, increase both "Blue X" and "Blue Y"
until full field blue screens match.
NOTE:
For speed, enable the "
box. Each color coordinate you select automatically
triggers a full field display of the corresponding color.
These coordinate adjustments move the three color points closer together (refer back to the chromaticity
chart shown in
only as necessary to ensure the resulting color palette is as large as possible. When done, you may need to
adjust lamp power slightly.
7. All screens should now be color-matched. Apply this new "User" gamut to a source at any time by
selecting it in the "Select Color Adjustment" list accessed in the
Using the Color Saturation Menu for Color Matching
You may prefer to use the Color Saturation menu to match colors across multiple screens. In the three Color
Adjustment secondary menus (Red, Green, Blue-see right), set all main values to "100" and the secondary
values to "0". Then judge by eye and adjust the slidebars as needed. Note that adjustments here define new x/y
coordinates in the Color Adjustments by X, Y menu.
For best results, the Color Adjustments by X, Y menu should be used first.
3-68
Auto Color Enable
Figure 3-18) to establish a "shared" gamut attainable by all projectors in your group. Adjust
Figure 3-40 Color Matching Using Color Saturation Menu
" check
Advanced Image Settings
menu.
Roadie HD+35K User Manual
020-100340-02 Rev. 1 (01-2010)