Christie Roadie HD+35K User Manual page 155

b. Rest the anode (+) end of the lamp on the lamp cradle as shown in
positive lamp connector over the bulb end.
c. Tighten setscrews in both negative and positive lamp connectors as shown in
IMPORTANT !
Roadie HD+35K User Manual
020-100340-02 Rev. 1 (01-2010)
Figure 4-1 Install Bulb
Figure 4-2 Secure Bulb at Cathode (-) and Anode (+) Connectors
Proper electrical contact prevents resistance in the lamp connectors. If you accidentally touch
the quartz body of the lamp with your bare hands, clean the surface as described in
Maintenance and Cleaning
.
Section 4: Maintenance
Figure 4-1, right, and slip the
Figure 4-2.
4.3,
4-7