The Lite Remote (Optional) - Christie Roadie HD+35K User Manual

Section 3: Operation

3.2.4 The Lite Remote (Optional)

A smaller "lite" remote with a laser pointer is also available as an option. It has a single IR protocol, and
therefore it needs no change in jumper settings, and connects via a 1/8" 3-pin phono jack connector to the input
panel on the side of the projector. Commands from this remote have priority if the standard IR remote is also
connected (to the rear of the projector). Refer to
NOTE:
Both remotes will work at the same time.
To change the jumper settings to "Wired", refer to
plug-in to the projector, make sure that you check the "Wired Keypad" check box in the
menu to enable this function.
Laser functionality
Specific to the "lite" remote, you can use the Laser pointer by pressing the L
when making presentation by pointing the remote at the screen to highlight an area of your presentation. The
closer you are to the screen, the brighter the laser beam appears. The laser pointer works best in an
environment where the ambient lighting can be controlled.
3-8
Test
Display a test pattern
Power
Turn projector ON or OFF
Inputs
Display from this source
NOTE: If PIP is ON, Input
keys affect the PIP window
only.
PIP
Turn picture-in-picture
ON or OFF
NOTE: N/A on WU Models.
Menu
Displays menus
Arrow Keys
Adjust a setting up or down
Navigate within a menu
Channel
Select channel (setup)
Laser
Activate laser pointer
at front of keypad
Gamma
Adjust mid-range levels
Number Keys
Enter a number, such
as channel, value, etc.
NOTE: Can be set to select
inputs if desired
TOGGLE KEYS=
Press and hold to toggle or press twice to toggle or press and release, followed by
Figure 3-6 The "Lite" Remote
3.2.3 Wired IR Remote.
Section 2.14 IR Remote Protocols and
Shutter
Open or close the shutter
Auto
Optimize image automatically
Lens Functions
Use and keys to
adjust parameters
OSD
Use to hide or show menus
Exit
Return to previous menu level
Enter
Select a highlighted menu item;
change or accept a value
Projector
Select a projector in multi-
projector installations
Bright
Adjust amount of
light in image
Contrast
Adjust difference
between light/dark
Func
Enter special code
such as color enabling
Help
Display context
sensitive help (toggle)
ON or OFF
Adjustment. Upon
Communications
ASER
key. This feature is useful
Roadie HD+35K User Manual
020-100340-02 Rev. 1 (01-2010)