Analog: Sync (Interlaced Or Progressive Scan Format); Dvi-I (Input 2); Dual Sd/Hd-Sdi (Input 5 Or 6, Standard With Projector) - Christie Roadie HD+35K User Manual

Input levels
Composite
S-Video, Luma (Y)
S-Video, Chroma (C)
DC offset
Nominal impedance
Maximum return loss (VSWR)

6.3.3 Analog: Sync (Interlaced or Progressive Scan Format)

Input levels
(for composite or separate H & V)
Impedance
(for composite or separate H & V)
Sync type
(for composite or separate H & V)
Polarity
(for composite or separate H & V)
Maximum return loss (VSWR)

6.3.4 DVI-I (INPUT 2)

Interface standard
Signal types / color spaces
Pixel clock rate
Analog sync input impedance
Maximum cable length
Supports EDID and HDCP
For all other DVI specifications, refer to

6.3.5 Dual SD/HD-SDI (INPUT 5 or 6, Standard with Projector)

Number of inputs
Connector type
Supported interface standards
Signal types / color spaces
Pixel clock rates supported
Roadie HD+35K User Manual
020-100340-02 Rev. 1 (01-2010)
1.0 V ± 3dB
(including sync tip)
p-p
1.0 V ± 3dB
(including sync tip)
p-p
630 mV nominal (burst)
p-p
± 2V
75
1.2:1 dB @ 6 MHz
0.5V – 4.0V
p-p p-p
75
Separate H and V
Bi-level or tri-level sync-on-green
Bi-level or tri-level composite
Serrations and/or Equalization pulses
MacroVision for stnd. & prog. video
Positive or negative
1.2:1 dB @ 200 MHz
DDWG DVI 1.0
RGB (digital or analog)
YPbPr (analog)
YCbCr (digital) not supported in v1.1 s/w
25 – 165 MHz
1 k
5 meters (16 ft.)
6.3.1 Analog: RGB / YPbPr (5 BNCs at INPUT 1)
2, each with active loop-through
BNCs, 75
SMPTE 259M
(13.5 MHz clock modes only)
SMPTE 292M and 372M
Serial digital YCbCr
(4:2:2 only)
13.5 MHz, 74.25 MHz, 74.25/1.001 MHz
Section 6: Specifications
(dual link)
above.
6-3