Editing Numerical Values - Christie Roadie HD+35K User Manual

Section 3: Operation
Edit a Character
To edit a highlighted character, press the U
spaces, and punctuation marks available. When the character you need appears, press the R
select, and replace the current character. The cursor moves to the next character within the current text string,
if present. You can also enter a number directly from the built-in keypad or standard IR remote. The digit is
accepted and the cursor moves to the next character space.
Add or Delete a Character or Space
To insert a space at the cursor location, press F
(or space), press F
Press Enter when Finished
To accept all edits made and close the
Press E
NOTE:

3.5.7 Editing Numerical Values

Enter numbers directly from the built-in keypad or standard IR remote in order to specify numbers representing
projectors, channels (source setups), or slots. As each digit is entered, it displays and the cursor moves on.
Note that Channels are assigned 2-digit numbers. For example, if you enter only a single digit (such as "7") for
a channel number, the channel automatically changes to "07". Enter "07" to utilize this channel.
NOTES: 1)
Once you enter the first digit, this digit over-writes the current entry.
keys, the number entered up to that point is accepted, and updated as the new value. 3) Press E
cancel editing of numerical values.
3-20
Figure 3-11 Entering Text
+ the L
UNC EFT
Arrow key.
Figure 3-12 Editing Text
Edit
XIT
at any time to cancel changes and redisplay the previously defined text.
and D
P OWN
Arrow keys to scroll through the alphabet, numbers,
+ the R
UNC IGHT Arrow key. To delete a highlighted character
window, press E
NTER
.
IGHT
Arrow key to
2)
If you press any non-numbered
XIT
Roadie HD+35K User Manual
020-100340-02 Rev. 1 (01-2010)
to