Christie Roadie HD+35K User Manual page 109

Menu Preferences
Use the options from the
of on-screen menus and messages.
Large Menu Font
Enter a check mark to enlarge menus and their text. You may have to adjust "Menu Location" to accommodate
the increased menu area.
Menu Location
Use the drop-down list to choose a pre-defined default or customized location for the display of all on-screen
menus.
To create a custom menu location quickly, choose a preset that is closest to the desired location. Then adjust
the slidebars of
cropping of larger menus, avoid locations too close to a corner or edge.
Horizontal and Vertical Shift
Shift your menus as desired, creating a customized menu location.
Display Channel List
Enter a check mark if you want to see a scrollable channel list whenever you press CHAN button from your
presentation. Channels marked with a LIST icon in the
Display Channel List
the channel list and input dialog box while switching channels and sources during a presentation, clear the
check box.
NOTE:
The Channel List and input dialog box cannot be hidden during use of the menus.
Display Sliderbars
Enter a check mark to superimpose a small slidebar over the current image whenever an adjustable parameter
is selected directly with a key such as C
still be accessed, but will be hidden during adjustment. This option does not affect slidebars in menus.
Display Error Messages
Choose how you want to be notified of errors detected in either the incoming signal or projector. Select
"Screen" or "All" (default) to see brief on-screen messages. This is particularly recommended during setup or
testing of the projector. Or select "Serial Ports" to receive messages via RS-232 or RS-422 serial
communication only. To hide error message displays, such as during shows and presentations, select "OFF" or
"Serial Ports".
Splash Screen Setup
Use the Splash Screen to choose when you would like to display a special introductory splash screen image,
such as your company logo, graphic or message.
• Always Off = A splash screen never appears
• Always On = A splash screen is always on behind the current display image, similar to wallpaper.
• Startup Only -The splash screen logo appears at projector startup only.
• Startup and No Signal - A splash screen appears at startup only if there is no source signal.
Roadie HD+35K User Manual
020-100340-02 Rev. 1 (01-2010)
Menu Preferences
Horizontal Shift Vertical Shift
and
option also enables on-screen feedback when using the I
ONT
secondary menu to adjust the appearance, content and/or location
to move the menu to the desired location. To prevent
Channel Setup
or B
RIGHT
. If "Display slidebars" is unchecked, these slidebars can
Section 3: Operation
menu then appear in the list. The
NPUT
key. If you prefer to hide
3-43