Communicating With Mirage Sst; Product Documentation; Related Documentation - Christie Mirage SST Technical Reference
Hide thumbs
Also See for Mirage SST:
- Installation and setup manual (78 pages) ,
- User manual (61 pages) ,
- Instruction sheet (5 pages)
Table of Contents
Advertisement
Communicating with
Mirage SST
Understand the information and procedures for communicating with Mirage SST from a remote
location.
You can communicate with the projector through the RS232 IN port or the Ethernet port. When
connecting the projector to a computer, use a direct connection. Docking ports can cause software
upgrade failures.
Product documentation
For installation, setup, and user information, see the product documentation available on the Christie
website. Read all instructions before using or servicing this product.
1. Access the documentation from the Christie website:
•
Go to this URL: http://bit.ly/2TI2aEW or
https://www.christiedigital.com/en-us/3d/products-and-solutions/projectors/mirage-sst.
•
Scan the QR code using a QR code reader app on a smartphone or tablet.
2. On the product page, switch to the Downloads tab.
Related documentation
Additional information on this product is available in the following documents.
•
Mirage SST Product Safety Guide (P/N: 020-102992-XX)
•
Mirage SST Installation and Setup Guide (P/N: 020-102956-XX)
•
Mirage SST User Guide (P/N: 020-102993-XX)
•
Mirage SST Projector Head Specifications Guide (P/N: 020-102994-XX)
•
Mirage SST Status System Guide (P/N: 020-103007-XX)
•
Mirage SST Projector Head Service Guide (P/N: 020-103039-XX)
Mirage SST Technical Reference–Serial Commands
020-103005-03 Rev. 1 (01-2021)
Copyright
©
2021 Christie Digital Systems USA, Inc. All rights reserved.
6
Advertisement
Table of Contents
