System Configuration (Diagnostics / Calibration) - Christie Roadie HD+35K User Manual

NOTE:
Keep new x,y coordinates within the original color gamut triangle shown here.
PROCEDURE FOR X,Y ADJUSTMENTS
Colour Saturation Secondary Menu
Colour Saturation
Use the
simply judging color performance by eye or meter. Like the
color control actually defines new x/y coordinates for that color and changes its hue-it is just a different
interface.
Adjust the hue of each primary color (red, green, blue, and white) by using more or less of it in relation to the
other colors. Apply at any time in the
NOTE:
A Color Saturation adjustment defines the corresponding x/y coordinates shown in the Color Adjustments
by X,Y secondary menu. These x/y coordinates remain stable for this "User" gamut until they are changed
again via either menu. Values displayed in the Color Saturation menu, however, will likely fluctuate as
you use the projector, and will be different when you return to this menu at some point in the future. These
floating changes do not affect the x/y coordinates or gamut.
Default Color Adjustments Secondary Menu
Refer to Section 3.8.3 System Configuration (Geometry & Color)
Reserved - No function.

3.8.4 System Configuration (Diagnostics / Calibration)

Test Pattern
Choose the desired internal test pattern to display, or select OFF to turn off a test pattern. Alternatively, use the
T
EST
key for cycling through test patterns.
Roadie HD+35K User Manual
020-100340-02 Rev. 1 (01-2010)
Figure 3-29 CIE 1931 Chromaticity Diagram
. Refer to Section 3.12 Using Multiple
secondary menu if you do not have specific color coordinates in mind and will be
Advanced Image Settings
Projectors.
Color Adjustment by X,Y
menu.
for description.
Section 3: Operation
secondary menu, each
3-51