Ricoh FT5580 Service Manual page 174

4. Remove the copier rear cover [A] (2 screws) and the toner collection
bottle [B].
5. Connect the 14P connector [C] of the cassette bank to CN413 on
the paper feed control board [D] of the copier. Connect the free con-
nectors of the cassette bank to the free connectors of the copier
(Red 2P [E] & Red 8P [F], White 10P [G]).
6. Remove the knob [H] from the relay roller drive assembly (1 screw).
R e m o v e t h e s u p p o r t s t r a p s [ I ] ( 1 s c r e w s e a c h ) , t h e c o p i e r f r o n t
cover (2 knob screws).
7. Remove the right inner cover [J] (4 screws), and install the relay
roller drive assembly [K] (2 screws).
8. Reinstall the right inner cover and the knob.
9.
Check the operation of the cassette bank and the copier system.
10. Fill out the New Equipment Condition Report.
9-3
12 June 1987