Ricoh FT5580 Service Manual page 197

30. Put five sheets of white paper (A3 of 11" x 17") on the exposure glass.
31. Set SP 10 for drum conditioning.
32. After the warm up period is completed, press the Start Key to start drum conditioning.
(100 is automatically displayed on the copy counter by SP 10).
33. Set all appropriate SP modes as required.
34. Turn off the main switch and the DIP switch 801-8, and reinstall the DIP switch cover.
Then, turn on the main switch.
35. Install the operating instruction cards [A] over the DIP switch cover (two-sided tape).
Then, install the receiving tray.
36. Load paper into the cassette, then check the machine operation and the copy quality.
37. Fill out the New Equipment Condition Report.
11-11