6. Hot Roller Replacement
Remove the oil blade. (Refer to "Oil Blade Replacement.")
1.
Remove any excess oil from the oil sump area [A], and remove the
2.
oil sump.
3.
Remove the fusing unit knob [B] (1 screw).
Remove the oil pump mechanism [C] with the oil tank (2 screws) and
4.
the pressure plate [D] (2 screws).
Rotate the front lamp terminal clockwise and remove the fusing lamp.
5.
NOTE:
D o n o t t o u c h t h e l a m p w i t h y o u r h a n d s b e c a u s e o i l m a y
discolor the lamp.
S w i n g d o w n t h e f u s i n g e x i t a s s e m b l y a n d u n h o o k t h e p r e s s u r e
6.
springs [E].
7.
R e m o v e t h e g e a r [ F ] ( 1 E - r i n g ) , a n d r e m o v e t h e h a r n e s s s u p p o r t
b r a c k e t [ G ] ( 2 s c r e w s a n d 2 h o o k s ) . T h e n , r e m o v e t h e r e a r l a m p
terminal [H] (1 screw and 1 hook).
8.
Remove the thermistor bracket [I] (2 screws).
3-27
12 June 1987