Ricoh FT5580 Service Manual page 61

12 June 1987
5. Remove the fiber optics cables [A] with the exposure lamp harness
[B] from the clamps in the optics cavity (5 screws).
6. Disconnect the OW & OL sensor cables [C] from the optics control
P C B ( C N 3 0 7 & 3 0 8 ) a n d t h e A D S c a b l e [ D ] f r o m t h e m a i n P C B
(CN111). Then, remove the cables from the clamp [E] on the back
of the optics PCB bracket.
7. Replace the scanner harness, and reassemble.
3-10