PAPER FEED
1. Pick-up, Paper Feed and Separation Rollers Replacement
- Pick-up and Feed Rollers -
1. Remove the paper feed guide plate [A] (2 screws). Then, remove the
snap ring [B], and replace the rollers [C].
- Separation Roller -
1. Remove the snap ring [D], and remove the roller [E].
2. Slide the slip clutch [F] off of the shaft. Then, clean and lubricate
the clutch with Mobil Temp 78.
CAUTION: When reinstalling the spring to between inner [G] and outer [H] hubs,
make sure that the spring [I] does not contact the inner hub. This is
because the inner hub does not slip properly if the spring contacts the
inner hub. This may cause midfeeds.
3. Reassemble.
11-17