Ricoh FT5580 Service Manual page 166

12 June 1987
2. Installation Procedure
NOTE:
1. Remove the three strips of tape [A].
2. Open the side cover and remove two strips of tape [B] on the top
cover.
3. Open the top cover and remove the strip of tape [C] securing the
stopper bar [D].
4. Turn off the main switch of the copier and unplug the power
cord.
5. Remove the first and the second cassettes from the copier.
6. R e m o v e t h e r e a r c o v e r [ E ] ( 2 s c r e w s ) , a n d r e m o v e t h e t o n e r
collection bottle [F].
7.
Remove the handIe [G] on the bottom right side of the copier (2 stud
screws) and remove the second cassette lift arm [H] (2 screws).
NOTE:
L C T c a n o n l y b e i n s t a l l e d w i t h t h e s y s t e m
cassette bank.
Save this handle for future use when transporting the copier.
8-2
t a b l e o r t h e
supply