Ricoh FT5580 Service Manual page 16

12 June 1987
11. European version only:
-220 to 240 volts conversion-
a) Remove the support straps [A] (1 screw each), the front cover
(2 knob screws) and the left inner cover (4 screws).
b) Disconnect the wire from the 220 volt terminal [B], and connect
this wire to the 240 volt terminal [C] as shown.
-Guidance ROM kit installation-
a) Replace
operation panel with the ROMs of the guidance ROM kit.
b) Reinstall the right inner and the front covers.
the three ROMs
1-8
[D] (IC 821, 822 & 823) on the