Ricoh FT5580 Service Manual page 20

12 June 1987
28. Put five sheets of white paper (A3 of 11" x 17") on the exposure
glass.
Set SP 10 for drum conditioning.
29.
30. After the warm up period is completed, press the Start Key to start
drum conditioning.
counter by SP 10.)
31. Set all appropriate SP modes as required.
Turn off the main switch the DIP switch 801-8, and reinstall the DIP
32.
switch cover.
33. Install the operating instruction cards [A] over the DIP switch cover
(two-sided tape). Then, install the receiving tray.
34.
Load paper into the cassette, then check the machine operation and
the copy quality.
35. Fill out the New Equipment Condition Report.
( 1 0 0 i s a u t o m a t i c a l l y d i s p l a y e d o n t h e c o p y
Then, turn on the main switch.
1 - 1 2