Positioning And Entrance Actuator Rollers Replacement - Ricoh FT5580 Service Manual

12 June 1987

6. Positioning and Entrance Actuator Rollers Replacement

Open the front cover.
1.
2. Remove the toner catch pan and the duplex paper actuator [A] (1 snap
ring - M3).
- Positioning Roller -
3. Remove the positioning roller [B] together with the drive belt [C] (1
snap ring).
NOTE:
- Entrance Actuator Roller -
4. Remove the entrance actuator roller [D] together with its axle plate
[E] (2 shoulder screws).
5. Separate the actuator roller from the axle plate (1 E-ring).
W h e n i n s t a l l i n g t h e n e w p o s i t i o n i n g r o l l e r , m a k e s u r e t h a t
the drive belt fits snugly in the grooves of the pulleys.
3-40