Cleaning Blade And Brush Replacement - Ricoh FT5580 Service Manual

12 June 1987

2. Cleaning Blade and Brush Replacement

- Cleaning Blade -
1. Take out the cleaning unit.
2. Replace the cleaning blade [A] (1 screw). (Be careful not to touch
the edge of the new blade.) (Apply setting powder or toner to the
new blade's surface before installing.)
3. Reassemble.
swivels.
- Cleaning Brush -
1. Remove the brush drive shaft [B] (1 snap ring) and the brush shaft
holder [C] with the bushing [D] (1 screw).
2. Replace the cleaning brush [E].
hands as the brush is conductive and oil may effect this.
t h e n o t c h o f t h e c l e a n i n g b r u s h [ F ] i s f i t t e d p r o p e r l y o v e r t h e
positioning pins [G] of the rear spindle.
A f t e r i n s t a l l i n g t h e b l a d e , m a k e s u r e t h a t t h e b l a d e
3-20
Do not touch the brush with bear
Make sure