Ricoh FT5580 Service Manual page 173

12 June 1987
2. Installation Procedure
1. Remove the external strips of tape [A]. Remove the right cover (4
screws) and the left cover (2 screws), then remove the right and left
retainers [B] (4 screws each) and the front and rear retainers [C] (1
screw each) from the paper feed unit.
2. Pull the drawer [D] all the way out, and remove the strips of tape [E].
3. Dock the copier to the cassette bank so that the pins of the copier
[F] are inserted into the positioning holes [G] of the cassette bank.
Then, secure the copier to the cassette bank (4 screws).
CAUTION: Be careful not to crush the copier harness and the copier cassette bank.
9-2