2. Transport Unit Removal
1.
Remove the rear cover (2 screws) and the toner collection
2.
Disconnect the connectors from the following components:
TC/SC power pack [A]
Quenching Stabilizer [B]
PCC power pack [C]
3.
L o w e r t h e p o w e r p a c k b r a c k e t [ D ] ( T C / S C , P C C , S t a b i l i z e r ) ( 2
screws).
4.
Remove the vacuum fan duct [E] (1 screw), and disconnect the free
two white connectors (2P & 6P) [F], and remove the ground wire [G]
(1 screw).
5.
Remove the fusing and cleaning units. Then, remove the bushing [H]
(1 screw).
6.
Remove the transport unit [I] with the bushing from the rear.
: Two 1P White
: 3P Red
3P White
: 1P White
11-18
bottle.