Table of Contents
Advertisement
3. Jogger Unit Removal
1.
Remove the rear cover (2 screws) and the toner collection bottle.
2.
Lower the power pack bracket. (Refer to "Transport Unit Removal.")
T h e n , r e m o v e t h e s e v e n c o n n e c t o r s [ A ] ( 2 P b l a c k , 2 P w h i t e , 2 P
yellow, 3P black, 6P black, 3P white, 3P red) from the jogger unit.
4.
R e m o v e t h e f r o n t c o v e r ( 2 k n o b s c r e w s [ B ] ) a n d t h e l o w e r i n n e r
cover [C] (2 screws).
5.
R e m o v e t h e t r a n s p o r t u n i t p o s t [ D ] ( 2 s c r e w s ) . T h e n , r e m o v e t h e
toner catch pan [E] and the settler bar.
6.
Remove the knob screws, then remove the jogger unit [F] (2 screws).
NOTE:
When reinstalling the jogger unit, install it half way, and then
confirm from the rear that the gears mesh.
11-21
Advertisement
Chapters
Table of Contents
