Ricoh FT5580 Service Manual page 126

4. T e m p o r a r i l y s e c u r e
washer M4 x 10) in the holes [B] on the upper cover, and install the
DF. Then, secure it with the lift switch actuator plate (3 pan head
screws - M4 x 10 [C], 1 flat head screw - M4 x 10 [D]).
5. R e m o v e t h e D F c o v e r [ E ] ( 4 s c r e w s ) , a n d r e m o v e t h e s h i p p i n g
retainers (2 form pads [F], 2 strips of tape [G]).
6. Move the DF stoppers [H] to the ends as shown and tighten the allen
screws.
CAUTION: When the DF cover is removed, the DF unit tends to fly up easily.
t h e t w o s c r e w s [ A ] ( p a n h e a d s c r e w s w i t h
5-3
12 June 1987