Ricoh FT5580 Service Manual page 17

12. Reinstall the fusing
13. Remove the image
14. Pull down the toner bottle holder [B], lower the transport unit [C], and
remove the drum inner cover [D] (1 screw).
15. Put a sheet of paper [E] on the T/S corona unit [F].
16. Remove the charge corona unit [G] (2 connectors), and remove the
drum stay [H] (1 screw, knob - reverse thread).
17. Place a sheet of paper on the floor.
lever [I], remove the development unit, and place it on the paper.
18. Remove the developer inlet cover [J] (1 screw).
19. P o u r o n e k i l o g r a m o f d e v e l o p e r i n t o t h e d e v e l o p m e n t u n i t w h i l e
turning the knob [K] counterclockwise to distribute the developer.
20. Reinstall the developer inlet cover.
unit.
density sensor cover [A].
1-9
Raise the development unit lock
12 June 1987