Ricoh FT5580 Service Manual page 128

14. Turn on the copier main switch, and set SP 72-1 to enable ARDF
operation.
accessing.)
15. Adjust the lead edge registration as follows:
a) Make a copy using the test chart in the platen mode with the flip
scale.
b ) K e e p t h i s c o p y f o r r e f e r e n c e a n d m a r k " P M " ( P l a t e n M o d e ) o n
the reverse side of it.
(Front Side Original)
c) Make a copy using the test chart with the DF.
d ) A d j u s t t h e D F r e g i s t r a t i o n a g a i n s t t h e p l a t e n
("PM") using VR 101 [A] on the DF PCB [B].
PM > DF:
PM < DF:
e ) C o n t i n u e t o r e p e a t s t e p s " c ) " a n d " d ) " u n t i l y o u a c h i e v e t h e
same registration as in step "b)".
( R e f e r t o t h e c o p i e r i n s t a l l a t i o n p r o c e d u r e f o r S P
Turn VR 101 counterclockwise
Turn VR 101 clockwise
5-5
12 June 1987
r e f e r e n c e m o d e