Ricoh FT5580 Service Manual page 198

CASSETTE
1. Remove the cassette cover.
2. Remove the side fences [A] (1 screw each) and the bottom plate [B].
3. Reposition the rear fence [C] (1 screw) in the desired paper size position.
NOTE: Paper size positions are shown on the inside of the cassette.
4. Reinstall the bottom plate.
5. Reinstall the side fences in the desired paper size position.
6. Attach the appropriate paper size decals [D] on the cassette at the positions shown.
7. Insert the desired actuator plate [E] in the slot on the front of the cassette as shown.
MODIFICATION
11-12