Ricoh FT5580 Service Manual page 219

3 . J A M S E N S O R R E P L A C E M E N T
* Upper Jam Sensor (Photo-transistor)
1. Turn off the main switch.
2. Open the sorter cover and remove the upper cover (3 screws).
3. Disconnect the harness from the upper jam sensor board [A].
4. Remove the upper jam sensor board (2 screws).
* Lower Jam Sensor (LED)
1. Turn off the main switch.
2. Remove the interrupt bin and the 15th bin.
3. Remove the antistatic brush [B] and the sensor cover [C] (2 screws).
4. Disconnect the harness from the lower jam sensor board [D].
5. Remove the lower jam sensor board (2 screws).
12-9
1 Feb. '88