Sixth Mirror Replacement - Ricoh FT5580 Service Manual

12 June 1987

2. Sixth Mirror Replacement

Remove the exposure glass. (Refer to "Exposure Glass Removal.")
Remove the lens housing cover [A] (4 screws). Then, shift the lens
housing [B] fully to the left and the 4th/5th mirror assembly [C] to the
right.
R e m o v e t h e s l i d i n g p l a t e [ D ] ( 4 s c r e w s ) , a n d r e m o v e t h e p l a t e
springs [E] from the both ends of the sixth mirror (1 screw each).
Remove the sixth mirror as follows:
Slide the sixth mirror [F] to the right.
(1)
Push it into the groove [G] at the rear.
(2)
(3) Swing the front end to the right.
(4) Pull it towards the front.
(5) Swing the rear end to the left.
Push it towards the rear.
(6)
(7) Remove it from the front.
5.
Replace the sixth mirror.
hands while installing a new mirror.)
(Do not touch the mirror surface with bare
3-2