Ricoh FT5580 Service Manual page 32

4. Enter the desired number using the number keys or zoom keys.
5. Press the Enter key.
• Service program mode is cleared by pressing the Clear Modes key.
3. Memory Clear Procedure
<SP-97 "Clears service counters and jam counters">
Service Program SP-97 is used to clear all self-diagnostic counters and
paper jam counters.
To perform this clear function,
performed.
1. Turn main switch OFF
2. Turn ON DIP SW 801-7, 8 on the operation panel and turn the main
switch ON.
Select Service program SP-97 and and press the "1" key on the key
3.
pad, then press the Enter key.
At this point Service Programs SP-120 through 139 will be cleared,
and default to "0"
4. Turn off the main switch.
5.
Turn DIP SW 801-7 and 8 off.
6. Turn the main switch ON to resume normal copier operation.
<SP-98 "Clears all counters">
Service Program SP-98 is used to clear all copy counter, self-diagnostic
counters and jam counters at once.
To perform this clear function, follow the same procedure as previously
describe but using SP-98 instead.
The following programs will be cleared:
1) SP-100 through SP-139
2) SP-85 (E.M. call telephone number)
3) SP-86 through SP-89 (PM counter)
4) All User Programs are cleared
the following procedure must be
2-8