Ricoh FT5580 Service Manual page 150

6. R e m o v e t h e r e a r c o v e r [ A ] ( 2 s c r e w s ) , a n d r e m o v e t h e t o n e r
collection bottle [B].
7. Remove the handle [C] on the bottom right side of the copier (2 stud
screws), then remove the second cassette lift arm [D] (2 screws).
NOTE: Save this handle for future use when transporting the copier.
8. Insert the tray into the second cassette position.
NOTE: Make sure that the rib [E] fits into the groove [F].
9. Open the side and top covers and secure the tray with two bolts [G].
Use the longer bolt for the rear side and the shorter bolt for the
front side.
7-3
12 June 1987