Ricoh FT5580 Service Manual page 137

6. Remove the receiving tray [A] and the rear cover [B] of the copier (2
screws). Swing out the main board [C] (2 screws).
CAUTION: Be careful not to damage the fiber optics cable.
7. Remove the five plastic caps [D] from the left cover.
8. Install the two studs [E] in the lower holes [F].
9. Mount the sorter on the copier. (Insert the two mounting studs [G]
i n t o t h e d o c k i n g h o l e s [ H ] , a n d p a s s t h e h a r n e s s [ I ] t h r o u g h t h e
access hole [J].)
10. Fix the sorter to the copier with the spacer [K] and the knob screw
[L] (front side only).
6-3
12 June 1987