Ricoh FT5580 Service Manual page 217

REPLACEMENT AND ADJUSTMENT
1 . S O R T E R R E M O V A L
3. Remove the rear cover of the copier (4 screws).
4. Open the sorter cover and remove the upper cover [A] of the sorter (3
screws).
5. Remove the front [B] and rear covers [C] of the sorter (6 screws).
6 .
Remove the copier main board shielding plate (2 screws).
7.
Disconnect the sorter harness from CN 108 [D] on the copier main board
[E] .
8 .
Swing the copier main board to the left (2 screws) and disconnect the red
2P [F] and the white 4P connector [G].
9 . Remove the ground wire [H] from the copier (1 screw).
10. Loosen the screws (front and rear, one each) securing the fixing brackets
[I], and slide the brackets down.
11. Remove the sorter from the copier.
12-7
1 Feb. '88