Replacement And Adjustment; Bin Drive Belt Replacement - Ricoh FT5580 Service Manual

REPLACEMENT AND ADJUSTMENT

1. Bin Drive Belt Replacement

When the duplex unit is not installed, it is not necessary to perform steps
2 to 4. Note the orientation of the flat surfaces of each pulley shaft.
Remove the sorter front [A] and rear [B] covers (2 screws each).
1.
2. Remove the rear cover of the copier (3 screws). Then disconnect
t h e s o r t e r h a r n e s s ( r e d 2 p c o n n e c t o r , w h i t e 1 1 p c o n n e c t o r , a n d
white 4p connector) and the sorter ground wire.
3. Remove the knob screw [C] from the duplex unit.
4. Remove the sorter unit from the machine.
5. Remove the lower cover [D] from the sorter (2 screws).
6-5
12 June 1987