Ricoh FT5580 Service Manual page 212

1 Feb. '88
2 . I N S T A L L A T I O N
1. Remove the tape holding the upper cover [A].
2. Remove the two strips of tape holding the relay guide plates [B] and take
out the cushion block [C].
3. Remove the shipping retainer [D] from the bottom of the vertical guide unit
[E] (1 screw).
4. Open the upper cover and remove the tape holding the vertical guide unit
[E] .
5. Take out the two cushion blocks [F] holding the vertical guide unit and the
shipping retainer [G].
P R O C E D U R E
12-2