Ricoh FT5580 Service Manual page 138

12 June 1987
11. Secure the sorter ground wire [A] (1 screw) (toothed washer [B] is
also to be installed for European version).
12. Connect the three connectors as follows:
Red 2P [C] to Red 2P free
White 4P [D] to white 4P free
White 12P [E] to CN108 on the main PCB
13. Reinstall the main PCB (2 screws).
14. Install the sorter covers and copier rear cover.
15. Peel off the paneI cover [F] at the left end of the operation panel.
16. Set the Sort/Stack key top [G] (copier accessory) and stick down
the Sort/Stack key cover [I] (copier accessory).
17.
S e t S P 7 1 - 1 t o e n a b l e t h e s o r t e r . ( R e f e r t o t h e c o p i e r i n s t a l l a t i o n
procedure.)
18. Check the sorter's operation and fill out the New Equipment Condition
Report.
6-4