Pre-Quenching Corona Wire Replacement - Ricoh FT5580 Service Manual

2. Pre-quenching Corona Wire Replacement

1. Remove the pre-quenching corona unit.
2. Remove the rear endblock cover [A].
3. Remove the front endblock cover [B] and take the old corona wire
[C] off the front spring [D].
4. Pull the rear spring [E] out of the rear endblock [F], and remove the
old quenching corona wire.
5. Install a new corona wire.
6. Reassemble the quenching corona unit.
3-55
12 June 1987