Table of Contents
Advertisement
Local Name
Register the name of the local terminal as the local name.
The local name is shown in the recipient's [Activity Report]. However, depending on the
recipient's device, it may not be shown.
Using the displayed keyboard and the numeric keypad, make the specification with not
more than 20 characters.
Company Logo
Save the sender name. The sender name is the name of the local terminal as printed
in the send headers and on cover notes.
Using the displayed keyboard and the numeric keypad, make the specification with not
more than 30 characters.
Machine Password
Set the receiving password when you want to limit the other parties that can send faxes.
When the receiving password is set, only a party that sends the correct receiving
password by F code is allowed to send or poll. Note that this means that faxes cannot
be accepted from a fax without the F code feature.
G3 Line 1, 2, 4 - Fax ID
When using G3 communications, register the G3 ID. The G3 ID is normally set to the
local terminal fax number.
Using the displayed keyboard and the numeric keypad, specify this is not more than 20
digits.
Note
G3 Line 1, 2, 4 - Dial Type
Set the dial type.
Tone
Tone dialing line.
10pps
Pulse dialing line.
G3 Line 1, 2, 4 - Line Type
Set the line type.
PSTN
Subscriber telephone line.
PBX
Private branch exchange.
• A G3 ID (fax number) consists of not more than 20 digits, including 0 to 9, +, and space.
Fax Mode Settings
11
321
Advertisement
Table of Contents
