Table of Contents
Advertisement
When Not Using a Receiver
1
Adjust the volume of the line monitor.
We recommend setting the volume of the line monitor to [Loud] so that it is easy to
hear the voice prompts.
For information on how to change the volume of the line monitor, refer to "Line Monitor Volume"
(P.269).
2
Select [On-hook (Manual Send/
Receive)] in the [On-hook/Others]
screen.
3
Select [Manual Receive].
4
Specify the fax number of the facsimile information service.
Specify the fax number with the numeric keypad, address number, or one touch
buttons. You cannot use the address book.
The keyboard displayed when
selecting [Alphanumeric] or
[Symbol] can also be sued.
Note
5
When the machine connects to the service, you will hear voice prompts. Follow the
voice prompts to enter the required numbers.
6
When input is finished, press the <Start> button.
• When the line type is set to a
pulse line, [Tone (:)] does not
appear.
• When you are using a dial
line, select [Tone (:)] if you
want to send out touch-tones
(for a service requiring the use
of a pulse line).
• Some types of services
cannot be used even if you set the machine to send out touch-tones.
Facsimile Information Services
4
157
Advertisement
Table of Contents
