Fuji Xerox ApeosPort 450 I User Manual page 486

Table of Contents

Advertisement

16 Problem Solving
Error Code
027-727
027-728
027-737
027-739
027-740
027-741
027-742
027-743
027-744
16
027-745
027-746
027-750
027-751
027-752
484
Category
C P F S M O
O [Cause]
[Remedy] Try to process the job flow again.
O [Cause]
[Remedy] Reduce the number of files, and send them again.
O
O [Cause]
[Remedy] Check to see whether you have privileges for the
O
O [Cause]
[Remedy] Check the path name of the job template server.
O
O [Cause]
[Remedy] Check the login user name and password.
O
O [Cause]
[Remedy] Have the network administrator check the network and
O
O [Cause]
[Remedy] Remove unnecessary data from the hard disk to increase
O
O [Cause]
[Remedy] Check the settings of the job template server.
O
O [Cause]
[Remedy] Make sure that the DNS server connection and the
O
O [Cause]
[Remedy] Either register the address of the DNS server on the
O
O [Cause]
[Remedy] Set up the correct port.
O [Cause]
[Cause]
O [Cause]
[Remedy] Check the settings of the job flow.
O [Cause]
[Remedy] Take one of the following actions:
Cause and Remedy
A parameter is illegal during an application interface.
The number of files that are to be sent to external
services exceeded the maximum number.
An error occurred while reading data from the job
template pool server.
directory which stores the job template in.
Unable to find the specified job template pool server.
Unable to login to the job template pool server.
Unable to connect to the job template pool server.
server environments.
Unable to store the job template due to insufficient hard
disk space.
free disk space.
The specified job template pool server is incorrect.
The domain name of the job template server has a
problem.
domain name have been registered to the DNS server.
The address of the DNS server has not been registered
on the machine.
machine, or set the address of the job template server
with its IP address.
The protocol settings on the job template pool server are
incorrect.
Attempted to give a fax/print/iFax command to the scan
document.
Faxing/printing/iFax is not available for scan documents.
Set the job flow correctly.
An error occurred during job flow processing.
A mandatory entry field is blank in the job flow.
Link mailboxes only to job flows that do not have
mandatory entry fields.
Set the default values to the mandatory fields of the job
flow.

Advertisement

Table of Contents
loading

Table of Contents