Table of Contents
Advertisement
18 Glossary
18
594
Term
ROM
ROS
Scan
Screen
Select
Send Password
Sender
Side Tray
SMTP
Start Reservation
Status Display Code
Store
Stored Programming
Super G3 (SG3)
Transmission Interval
Transparency Copy
Description
Read Only Memory. It is a storage device (memory) specific
for the retrieval of information.
Raster Output Scanner. It is a device for writing image signals
to a drum (light sensitive). A ROS is often referred to as a laser
beam scanner.
Sensing or reading a paper document and converting the
optical image of the document to an electronic image.
The machine offers two scanning devices: document glass
and document feeder.
The screen that is displayed on the touch screen. It displays
messages and feature buttons.
In this document, "Select" refers to highlighting a feature
selection by touching the feature button on the touch screen
with your finger.
This feature requires to enter a "S" and the ID of a remote
terminal after entering its fax number. This prevents
transmission errors.
Originator of a communication. It is used as a word
corresponding to "recipient".
A feature that outputs copies to the side tray with the copied-
side face up.
Simple Mail Transfer Protocol.
A communications protocol (an agreement governing the way
data is transmitted) commonly used for sending and receiving
e-mail.
In this guide, this refers to loading a document, selecting
features, and pressing the <Start> button immediately after
switching the power on. Once the machine is warmed up and
ready, it will automatically start copying.
A code that indicates the machine status. When an error
occurs on the machine, a status display code appears on the
touch screen.
In this guide, it is referred to as scanning an image of a
document and saving the image on the machine.
By registering a series of operations, the machine executes
the operations with just one press of [Stored Programming] on
the touch screen.
A G3 communication system conforming to ITU V.34.
This system offers higher transmission speed (33.6 kbps) than
the normal G3 mode.
The period between transmissions.
A feature that allows copying on transparencies and inserting
blank or copied paper between copied transparencies.
Advertisement
Table of Contents
