Table of Contents
Advertisement
11 System Settings
System Administrator Password
You can set the password for the System Administration mode.
Setting a password is strongly recommended for security.
Note
The system administrator password becomes valid when the password feature is
activated in the Login Setup/Auditron Administration operation. Set the password after
setting the system administrator user ID.
You can set the password from 4 to 12 numeric digits.
For information on enabling and disabling passwords, refer to "Password Entry from Control Panel"
(P.365).
1
Select [System Administrator
Password].
11
2
Select [Keyboard].
3
Enter a new password from 4 to 12
numeric digits in [New Password],
and select [Next].
4
In [Re-enter Password], enter the same password, and select [Save].
Note
Maximum Login Attempts
If authentication of the system administrator user ID fails repeatedly, you can set a limit
beyond which further tries are not allowed.
You can set the number of authentication attempts allowed, from 1 to 10.
Note
1
Select [Maximum Login Attempts].
2
Select [On].
3
With [
of authentication attempts allowed.
4
Select [Save].
358
• The default system administrator password is "x-admin".
• To set no password, leave the password blank, and select [Save].
• The count is reset when the machine is restarted.
• To chancel the access rejection state, restart the machine by turning off and on the power.
] and [
], set the number
Advertisement
Table of Contents
