Fuji Xerox ApeosPort 450 I User Manual page 366

11 System Settings
PJL Receive Command Control
Print jobs submitted by external equipment can be controlled by PJL commands. The
settings for [Receive Control] described later are applied when either [Off] is selected
or no PJL command is received.
PJL Output Command Control
Print jobs submitted by an external equipment can be controlled by PJL commands.
Receive Control
When using the authentication feature, set how to handle print jobs for which
authentication failed (the print driver did not provide the correct user ID, password, and
other authentication information).
For information on printing from a print driver, refer to "Printing" (P.224).
11
Note
1
Select [Receive Control] and select
[Change Settings].
2
Select [According to Print Auditron]
or [Save All].
3
Select the treatment of jobs with
invalid authentication and jobs with no user ID.
According to Print Auditron
The operation follows the receiving controls set on the machine. When [According to
Print Auditron] is selected, items [Job Login Failure] and [Job without UserID] appear.
Note
For information on job saving, refer to "Charge Print" (P.373).
Save All
Regardless of whether the authentication feature is being used or not, all jobs received
are saved.
For information on job saving, refer to "Charge Print" (P.373).
364
• Even if [Print Service] in Login Setup/Auditron Administration is set to [Off], [According to
Print Auditron] set here is not affected.
• [Job without UserID] is not displayed by selecting [Non-Account Print] for [Auditron Settings]
in the [Properties] tab of the CentreWare Internet Services. For information on CentreWare
Internet Services, refer to "CentreWare Internet Services" (P.220).
Job Login Failure
Set the action for jobs for which authentication failed.
- When [Save All] is selected, all jobs received are saved.
- When [Cancel Job] is selected, jobs received are deleted.
Job without UserID
Set the action for jobs with no user ID input.
- When [Save All] is selected, all jobs received are saved.
- When [Cancel Job] is selected, jobs received are deleted.