Customizing the Screen Default
Customize items displayed on the screen when turning the machine on or canceling the
power saver mode. This section describes how to set the [Check Mailbox] screen as
the initial screen, for example.
1
Select [Screen Default] and select
[Change Settings]
2
Select [Check Mailbox].
Note • Select [
Customizing the Screen after Auto Clear
Customize items displayed on the screen after auto clear. You can select from [Last
Selection Screen] and [All Services].
1
Select [Screen after Auto Clear]
and select [Change Settings].
2
Select [Last Selection Screen] or
[All Services].
Customizing the [All Services] Screen
You can customize the types of features and the location of buttons on the [All
Services] screen when pressing the <All Services> button on the control panel.
The following is the factory default settings.
Note
Copy
Fax/Internet Fax
E-mail
Scan to Mailbox
Network Scanning
Scan to FTP/SMB
Check Mailbox
Stored Programming
Job Flow Sheet
Language
Setup Menu
Print Mode
Fax Receiving Mode
Activity Report
The following is the procedure to change the [Language] button displayed at the upper
right corner of the first page of the [All Services] screen to the [Stored Programming]
button, as an example.
.
]to return to the previous
screen and select [
] to
move to the next screen.
• When the feature is not available, the button will not be displayed. Also, if the feature is
unavailable due to hardware problems, the button will be grayed out.
Control Panel
2
43