Edge Erase (Erasing Edges And Margin Shadows In The Document) - Fuji Xerox ApeosPort 450 I User Manual

Table of Contents

Advertisement

3 Copy
1
Select [Mixed Size Originals].
2
Select [On].
Off
Select this item when all documents
are of the same size.
On
When documents of different sizes are copied, the machine automatically detects the
size of each document.

Edge Erase (Erasing Edges and Margin Shadows in the Document)

When you make copies with the document cover open or make copies from a book,
black shadows sometimes appear along the edges and center margin of the paper. If
this happens, you can make copies with the shadows erased.
Important • Confirm that the orientation of the document and the [Original Orientation] setting of the
Note
3
For information on the areas that can actually be printed, refer to
1
Select [Edge Erase].
2
Select [Edge Erase].
3
Use [
erase for each of the top and
bottom, left and right, and center.
Normal
The edge erase amount is set to 2 mm for the top and bottom, and left and right. If you
do not want to erase edges, set each [Edge Erase] value to 0 mm.
Edge Erase
You can erase only the amount necessary.
68
[Scan Options] screen are the same.
• For 2-sided originals, the same edge erase amounts are set for the front and back sides.
• If you set [Reduce/Enlarge], the edge erase amounts will be reduced or enlarged in
proportion to the ratio you configured.
] and [
] to set the width to
Top & Bottom Erase
Shadows at the top and bottom of the document are erased. Edges at the top and
bottom are erased in accordance with the direction that the document was loaded.
You can set the edge erase width within the range from 0 to 50 mm in 1 mm
increments.
Left & Right Erase
Shadows on the left and right of the document are erased. Edges on the left and right
are erased in accordance with the direction that the document was loaded. You can
set the edge erase width within the range from 0 to 50 mm in 1 mm increments.
Binding Erase
Shadows in the center of documents such as booklets or documents with facing
pages are erased. You can set the binding erase width within the range from 0 to 50
mm in 1mm increments.
.
"Printable Area" (P.541)

Advertisement

Table of Contents
loading

Table of Contents