Table of Contents
Advertisement
16 Problem Solving
3
Hold the left and right tabs on the
booklet staple cartridge to pull the
cartridge out.
4
Remove the jammed staples as
shown in the figure.
5
Hold the tabs on the booklet staple
cartridge to return the cartridge to
the original position, and gently
push the cartridge until you hear it
click into place.
6
Return the unit to its original
16
position.
7
Close the front cover of the finisher.
Note
If the staples cannot be removed after carrying out the above procedures, contact our
Customer Support Center.
530
• A message will be displayed and the machine will not operate unless the front cover is
completely closed.
Advertisement
Table of Contents
